Wavelength Division Multiplexing
Dense Wavelength Division Multiplexing
Millions of Products. Read Reviews. Product: Prices.
www.NexTag.com/electronics
Wavelength Bandwidth Providers
Get Pricing and Access to National Wavelength Providers as well as Counsel in Building & Deploying Your Network. One Call, Multiple Quotes.
www.NEFiber.com
Wavelength Cisco
Save on all your networking needs from Exava. Shop Smart and Save.
www.exava.com
Multiplexers
Multiplexers. Computer Networking Services, Fast.
TechSerious.com
Wavelength-division multiplexing - Wikipedia, the free encyclopedia
The term wavelength-division multiplexing is commonly applied to an optical ... Dense Wavelength Division Multiplexing, or DWDM for short, refers originally to ...
en.wikipedia.org
Wavelength Division Multiplexing
WDM - Wavelength Division Multiplexing. Written by: Adar Shtainhart. Ronen Segal. Aviad Tsherniak ... is WDM (wavelength division multiplexing), in which ...
www2.rad.com
wavelength-division multiplexing: Definition from Answers.com
wavelength-division multiplexing ( ¦w?v?le?th d?¦vizh?n ?m?lt??pleksi? ) ( communications ) The sharing of the total available pass-band
www.answers.com
Wavelength-Division Multiplexing (WDM)
Wavelength-division multiplexing (WDM)_wavelength-division multiplexing (WDM) is ... to the network through a wavelength-sensitive switching/routing node (details of ...
networks.cs.ucdavis.edu
Wavelength Division Multiplexing: - Ray T. Chen Book at Yahoo! Shopping
Yahoo! Shopping is the best place to comparison shop for Wavelength Division Multiplexing: - Ray T. Chen Book. Compare products, compare prices, read reviews and ...
shopping.yahoo.com
Wavelength Division Multiplexing for Cable MSOs
Wavelength Division Multiplexing is a. technology used to expand fiber optic ... Division Multiplexing (CWDM) tech- nology utilizes much larger wavelength ...
www.nortel.com
Warning: mkdir() [function.mkdir]: Permission denied in /home/webs/affiliatelib2/CacheManager.php on line 12
Warning: mkdir() [function.mkdir]: No such file or directory in /home/webs/affiliatelib2/CacheManager.php on line 12
Warning: fopen(/home/templatecore2cache//*cluesnet.com/b3/b340cdc99f35c251aab8cbd1b9bb3d022d1816ea.tc2cache) [function.fopen]: failed to open stream: No such file or directory in /home/webs/affiliatelib2/CacheManager.php on line 130
Warning: fwrite(): supplied argument is not a valid stream resource in /home/webs/affiliatelib2/CacheManager.php on line 131
Warning: fclose(): supplied argument is not a valid stream resource in /home/webs/affiliatelib2/CacheManager.php on line 132
In fiber-optic communication, wavelength-division multiplexing (WDM) is a technology which Multiplexing multiple Optical Carrier signals on a single optical fiber by using different wavelengths (colours) of laser light to carry different signals. This allows for a multiplication in capacity, in addition to enabling bidirectional communications over one strand of fibre. "The true potential of optical fibre is fully exploited when multiple beams of light at different frequencies are transmitted on the same fibre. This is a form of frequency division multiplexing (FDM) but is commonly called wavelength division multiplexing."Stallings, W. "Data and Computer Communications", Pearson Education, Inc., 2007. p.247-248.The term wavelength-division multiplexing is commonly applied to an optical carrier (which is typically described by its wavelength), whereas frequency-division multiplexing typically applies to a radio carrier (which is more often described by frequency). However, since wavelength and frequency are inversely proportional, and since radio and light are both forms of electromagnetic radiation, the two terms are equivalent.
WDM systems 's WDM SystemA WDM system uses a multiplexer at the transmitter to join the signals together, and a demultiplexer at the receiver to split them apart. With the right type of fibre it is possible to have a device that does both simultaneously, and can function as an optical add-drop multiplexer. The optical filtering devices used have traditionally been etalons, stable solid-state single-frequency Fabry-Perot interferometers in the form of thin-film-coated optical glass.
The concept was first published in 1970, and by 1978 WDM systems were being realized in the laboratory. The first WDM systems only combined two signals. Modern systems can handle up to 160 signals and can thus expand a basic 10 Gbit/s fibre system to a theoretical total capacity of over 1.6 Tbit/s over a single fibre pair.
WDM systems are popular with Telephone company because they allow them to expand the capacity of the network without laying more fibre. By using WDM and optical amplifiers, they can accommodate several generations of technology development in their optical infrastructure without having to overhaul the backbone network. Capacity of a given link can be expanded by simply upgrading the multiplexers and demultiplexers at each end.
This is often done by using optical-to-electrical-to-optical translation at the very edge of the transport network, thus permitting interoperation with existing equipment with optical interfaces.
Most WDM systems operate on single mode fibre optical cables, which have a core diameter of 9 µm. Certain forms of WDM can also be used in multi-mode fibre cables (also known as premises cables) which have core diameters of 50 or 62.5 µm.
Early WDM systems were expensive and complicated to run. However, recent standardization and better understanding of the dynamics of WDM systems have made WDM much cheaper to deploy.
Optical receivers, in contrast to laser sources, tend to be wideband devices. Therefore the demultiplexer must provide the wavelength selectivity of the receiver in the WDM system.
WDM systems are divided in different wavelength patterns, conventional or coarse and dense WDM. Conventional WDM systems provide up to 16 channels in the 3rd transmission window (C-band) of silica fibres around 1550 nm. DWDM uses the same transmission window but with denser channel spacing. Channel plans vary, but a typical system would use 40 channels at 100 GHz spacing or 80 channels with 50 GHz spacing. Some technologies are capable of 25 GHz spacing (sometimes called ultra dense WDM). New amplification options (Raman amplification) enable the extension of the usable wavelengths to the L-band, more or less doubling these numbers.
CWDM in contrast to conventional WDM and DWDM uses increased channel spacing to allow less sophisticated and thus cheaper transceiver designs. To again provide 16 channels on a single fibre CWDM uses the entire frequency band between second and third transmission window (1310/1550 nm respectively) including both windows (minimum dispersion window and minimum attenuation window) but also the critical area where OH scattering may occur, recommending the use of OH-free silica fibres in case the wavelengths between second and third transmission window shall also be used. Avoiding this region, the channels 31,49,51,53,55,57,59,61 remain and these are the most commonly used.
WDM, DWDM and CWDM are based on the same concept of using multiple wavelengths of light on a single fibre, but differ in the spacing of the wavelengths, number of channels, and the ability to amplify the multiplexed signals in the optical space. EDFA provide an efficient wideband amplification for the C-band, Raman amplification adds a mechanism for amplification in the L-band. For CWDM wideband optical amplification is not available, limiting the optical spans to several tens of kilometres.
Coarse WDM Originally, the term "Coarse Wavelength Division Multiplexing" was fairly generic, and meant a number of different things. In general, these things shared the fact that the choice of channel spacings and frequency stability was such that Erbium Doped Fibre Amplifiers (EDFAs) could not be utilized. Prior to the relatively recent ITU standardization of the term, one common meaning for Coarse WDM meant two (or possibly more) signals multiplexed onto a single fibre, where one signal was in the 1550-nm band, and the other in the 1310-nm band.
Recently the ITU has standardized a 20 nanometre channel spacing grid for use with CWDM, using the wavelengths between 1310 nm and 1610 nm. Many CWDM wavelengths below 1470 nm are considered "unusable" on older G.652 specification fibres, due to the increased attenuation in the 1310-1470 nm bands. Newer fibres which conform to the G.652.C and G.652.D standards, such as Corning SMF-28e and Samsung Widepass nearly eliminate the "water peak" attenuation peak and allow for full operation of all twenty ITU CWDM channels in metropolitan networks. For more information on G.652.C and .D compliant fibres please see the links at the bottom of the article.
The Ethernet LX-4 physical layer standard is an example of a CWDM system in which four wavelengths near 1310 nm, each carrying a 3.125 gigabit(Gb)-per-second data stream, are used to carry 10 gigabit-per-second of aggregate data.
The main characteristic of the recent ITU CWDM standard is that the signals are not spaced appropriately for amplification by EDFAs. This therefore limits the total CWDM optical span to somewhere near 60 km for a 2.5 Gb/s signal, which is suitable for use in metropolitan applications. The relaxed optical frequency stabilization requirements allow the associated costs of CWDM to approach those of non-WDM optical components.
CWDM is also being used in cable television networks, where different wavelengths are used for the downstream and upstream signals. In these systems, the wavelengths used are often widely separated, for example the downstream signal might be at 1310 nm while the upstream signal is at 1550 nm.
An interesting and relatively recent development relating Coarse WDM is the creation of GBIC and Small Form Factor Pluggable (SFP transceiver) transceivers utilizing standardized CWDM wavelengths. GBIC and SFP optics allow for something very close to a seamless upgrade in even legacy systems that support SFP interfaces. Thus, a legacy switch system can be easily "converted" to allow wavelength multiplexed transport over a fibre simply by judicious choice of transceiver wavelengths, combined with an inexpensive passive optical multiplexing device.
Dense WDM Dense Wavelength Division Multiplexing, or DWDM for short, refers originally to optical signals multiplexed within the 1550-nm band so as to leverage the capabilities (and cost) of erbium doped fiber amplifier (EDFAs), which are effective for wavelengths between approximately 1525 nm - 1565 nm (C band), or 1570 nm - 1610 nm (L band). EDFAs were originally developed to replace Synchronous optical networking optical-electrical-optical (OEO) regenerators, which they have made practically obsolete. EDFAs can amplify any optical signal in their operating range, regardless of the modulated bit rate. In terms of multi-wavelength signals, so long as the EDFA has enough pump energy available to it, it can amplify as many optical signals as can be multiplexed into its amplification band (though signal densities are limited by choice of modulation format). EDFAs therefore allow a single-channel optical link to be upgraded in bit rate by replacing only equipment at the ends of the link, while retaining the existing EDFA or series of EDFAs along a long haul route. Furthermore, single-wavelength links using EDFAs can similarly be upgraded to WDM links at reasonable cost. The EDFAs cost is thus leveraged across as many channels as can be multiplexed into the 1550-nm band.
DWDM systems At this stage, a basic DWDM system contains several main components:
- 1. A DWDM terminal multiplexer. The terminal multiplexer actually contains one wavelength converting transponder for each wavelength signal it will carry. The wavelength converting transponders receive the input optical signal (i.e., from a client-layer Synchronous optical networking or other signal), convert that signal into the electrical domain, and retransmit the signal using a 1550-nm band laser. (Early DWDM systems contained 4 or 8 wavelength converting transponders in the mid 1990s. By 2000 or so, commercial systems capable of carrying 128 signals were available.) The terminal mux also contains an optical multiplexer, which takes the various 1550-nm band signals and places them onto a single SMF-28 fibre. The terminal multiplexer may or may not also support a local EDFA for power amplification of the multi-wavelength optical signal.
- 2. An intermediate optical terminal, or Optical Add-drop multiplexer. This is a remote amplification site that amplifies the multi-wavelength signal that may have traversed up to 140 km or more before reaching the remote site. Optical diagnostics and telemetry are often extracted or inserted at such a site, to allow for localization of any fibre breaks or signal impairments. In more sophisticated systems (which are no longer point-to-point), several signals out of the multiwavelength signal may be removed and dropped locally.
- 3. A DWDM terminal demultiplexer. The terminal demultiplexer breaks the multi-wavelength signal back into individual signals and outputs them on separate fibres for client-layer systems (such as Synchronous optical networking) to detect. Originally, this demultiplexing was performed entirely passively, except for some telemetry, as most SONET systems can receive 1550-nm signals. However, in order to allow for transmission to remote client-layer systems (and to allow for digital domain signal integrity determination) such demultiplexed signals are usually sent to O/E/O output transponders prior to being relayed to their client-layer systems. Often, the functionality of output transponder has been integrated into that of input transponder, so that most commercial systems have transponders that support bi-directional interfaces on both their 1550-nm (i.e., internal) side, and external (i.e., client-facing) side. Transponders in some systems supporting 40 GHz nominal operation may also perform error correction (FEC) via 'digital wrapper' technology, as described in the ITU-T G.709 standard.
- 4. Optical Supervisory Channel (OSC). This is an additional wavelength usually outside the EDFA amplification band (at 1510nm, 1620nm, 1310nm or another proprietary wavelength). The OSC carries information about the multi-wavelength optical signal as well as remote conditions at the optical terminal or EDFA site. It is also normally used for remote software upgrades and user (ie, network operator) Network Management information. It is the multi-wavelength analogue to SONET's DCC (or supervisory channel). ITU standards suggest that thee OSC should utilize an OC-3 signal structure, though some vendors have opted to use 100 megabit Ethernet or another signal format. Unlike the 1550-nm band client signal-carrying wavelengths, the OSC is always terminated at intermediate amplifier sites, where it receives local information before retransmission.
The introduction of the ITU-T G.694.1 frequency grid in 2002 has made it easier to integrate WDM with older but more standard Synchronous optical networking systems. WDM wavelengths are positioned in a grid having exactly 100 GHz (about 0.8nm) spacing in optical frequency, with a reference frequency fixed at 193.10 THz (1552.52nm). The main grid is placed inside the optical fibre amplifier bandwidth, but can be extended to wider bandwidths. Today's DWDM systems use 50 GHz or even 25 GHz channel spacing for up to 160 channel operation.
DWDM systems have to maintain more stable wavelength or frequency than those needed for CWDM because of the closer spacing of the wavelengths. Precision temperature control of laser transmitter is required in DWDM systems to prevent "drift" off a very narrow frequency window of the order of a few GHz. In addition, since DWDM provides greater maximum capacity it tends to be used at a higher level in the communications hierarchy than CWDM, for example on the Internet backbone and is therefore associated with higher modulation rates, thus creating a smaller market for DWDM devices with very high performance levels. These factors of smaller volume and higher performance result in DWDM systems typically being more expensive than CWDM.
Recent innovations in DWDM transport systems include pluggable and software-tunable transceiver modules capable of operating on 40 or 80 channels. This dramatically reduces the need for discrete spare pluggable modules, when a handful of pluggable devices can handle the full range of wavelengths.
Wavelength converting transponders At this stage, some details concerning Wavelength Converting Transponders should be discussed, as this will clarify the role played by current DWDM technology as an additional optical transport layer. It will also serve to outline the evolution of such systems over the last 10 or so years.
As stated above, wavelength converting transponders served originally to translate the transmit wavelength of a client-layer signal into one of the DWDM system's internal wavelengths in the 1550-nm band (note that even external wavelengths in the 1550-nm will most likely need to be translated, as they will almost certainly not have the required frequency stability tolerances nor will it have the optical power necessary for the system's EDFA.
In the mid-1990s, however, wavelength converting transponders rapidly took on the additional function of signal regeneration. Signal regeneration in transponders quickly evolved through 1R to 2R to 3R and into overhead-monitoring multi-bitrate 3R regenerators. These differences are outlined below:
1R: Retransmission. Basically, early transponders were "garbage in garbage out" in that their output was nearly an analogue 'copy' of the received optical signal, with little signal cleanup occurring. This limited the reach of early DWDM systems because the signal had to be handed off to a client-layer receiver (likely from a different vendor) before the signal deteriorated too far. Signal monitoring was basically confined to optical domain parameters such as received power.
2R: Re-time and re-transmit. Transponders of this type were not very common and utilized a quasi-digital Schmidt-triggering method for signal clean-up. Some rudimentary signal quality monitoring was done by such transmitters that basically looked at analogue parameters.
3R: Re-time, re-transmit, re-clock. 3R Transponders were fully digital and normally able to view Synchronous optical networking section layer overhead bytes such as A1 and A2 to determine signal quality health. Many systems will offer 2.5 Gb transponders, which will normally mean the transponder is able to perform 3R regeneration on OC-3/12/48 signals, and possibly gigabit Ethernet, and reporting on signal health by monitoring SONET/SDH section layer overhead bytes. Many transponders will be able to perform full multi-rate 3R in both directions. Some vendors offer 10 Gig transponders, which will perform Section layer overhead monitoring to all rates up to and including OC-192.
Muxponder: The muxponder (from multiplexed transponder) has different names depending on vendor. It essentially performs some relatively simple time division multiplexing of lower rate signals into a higher rate carrier within the system (a common example is the ability to accept 4 OC-48s and then output a single OC-192 in the 1550-nm band). More recent muxponder designs have absorbed more and more TDM functionality, in some cases obviating the need for traditional Synchronous optical networking transport equipment.
The reconfigurable optical add-drop multiplexer As mentioned above, intermediate optical amplification sites in DWDM systems may allow for the dropping and adding of certain wavelength channels. In most systems deployed as of August 2006 this is done infrequently, because adding or dropping wavelengths requires manually inserting or replacing wavelength-selective cards. This is costly, and in some systems requires that all active traffic be removed from the DWDM system, because inserting or removing the wavelength-specific cards interrupts the multi-wavelength optical signal.
With a reconfigurable optical add-drop multiplexer (ROADM), network operators can remotely reconfigure the multiplexer by sending soft commands. The architecture of the ROADM is such that dropping or adding wavelengths does not interrupt the 'pass-through' channels. Numerous technological approaches are utilized for various commercial ROADMs, the trade off being between cost, optical power, and flexibility.
Optical cross connects (OXCs) Various categories of OXCs include electronic, optical, and wavelength selective devices.
See also
- Spectrometer
- Time-division multiplexing
- Code-division multiple access
- Dark fiber
- SFP transceiver
- Polarization mode dispersion
- DQPSK
References
External links
- Optical Internetworking Forum Tunable Laser Interoperability Agreement
- Introducing DWDM
- Wavelength Division Multiplexing explained
- Wavelength Division Multiplexing via polymeric fibres
wavelength division multiplexing from FOLDOC
wavelength division multiplexing < communications > (WDM) Multiplexing several Optical Carrier n signals on a single optical fibre by using different wavelengths (colours) of laser ...
wave division multiplexing from FOLDOC
wave division multiplexing < spelling > A common misnomer for wavelength division multiplexing. (2002-07-16) Try this search on Wikipedia, OneLook, Google
Wavelength-division multiplexing - Wikipedia, the free encyclopedia
In fiber-optic communications, wavelength-division multiplexing (WDM) is a technology which multiplexes multiple optical carrier signals on a single optical fiber by using ...
Dictionary of Computers - wavelength division multiplexing
Skip to page content | Tiscali Quicklinks. Please visit our Accessibility Page for a list of the Access Keys you can use to find your way around the site, skip directly to the main ...
Wavelength Division Multiplexing
W D M - Wavelength Division Multiplexing Written by: Adar Shtainhart Ronen Segal Aviad Tsherniak Introduction The Need for Speed. Telecommunications for local access has evolved ...
"Metro DWDM" - Application of Dense Wavelength Division Multiplexing ...
Metro DWDM" - Application of Dense Wavelength Division Multiplexing in Metropolitan Transport Networks Dejan Bojic and John J O'Reilly Department of Electronic and Electrical ...
wavelength division multiplexing definition of wavelength division ...
communications) wavelength division multiplexing - (WDM) Multiplexing several Optical Carrier n signals on a single optical fibre by using different wavelengths (colours) of laser ...
e-Prints Soton - Novel orthogonal wavelength division multiplexing ...
The continuous increase of the transmission capacity demand reveals particularly interesting new modulation and multiplexing techniques targeting at high spectral efficiency (bit/s ...
Dense Wavelength Division Multiplexing (DWDM)
Dense Wavelength Division Multiplexing (DWDM) WDM is a technique for increasing the information-carrying capacity of optical fibre by transmitting multiple signals simultaneously ...
DENSE WAVELENGTH DIVISION MULTIPLEXING (DWDM)
Slide 30 of 30